Activity

Fire Resistant Board For External Use

A fire resistant board for external use is a great way to give a building an extra layer of protection against fire. It also offers great flexibility and durability. These boards are available in a wide variety of colors and patterns. For example, you can choose from FIBRODICE MS or Quietstone AQUAFIRE. You can also choose from Kemwell Fire or GlasRoc Shaftliner.
FIBRODICE MS

The ODITEC FIBRODICE MS fire resistant board is an insulating board based on mineral fibres, expanded perlite and special binders. It is a highly-effective thermal insulator and is used in fire resistant doors and wall lining. It is suitable for sheltered exterior and interior applications, and is completely free of asbestos.

The material behavior of fire protective boards is determined by a complex interaction of shrinkage, deformation, and temperature flows. Different board types have varying degrees of fire resistance, and classification must be based on the testing performed for the specific application. This requires knowledge of board thickness, installation method, and other factors.

The FIBRODICE MS fire resistant board has a noncombustible composition and meets the highest fire-rated performance standards. It is suitable for use on internal and external walls, and has been proven effective in preventing the spread of fires. It also enables a building’s structure to remain intact and allow occupants to safely exit.

FIBRODICE MS fire resistant board is available in a wide range of sizes and designs. These boards feature a smooth surface on the external side and are easy to paint and finish. It is CE-notified and complies with EN 14306:2009 A1 certification standard. It is also available with DOP certification, which is available on request.
Quietstone AQUAFIRE

Quietstone AQUAFIRE is a fibre-reinforced lightweight cement fire board that offers superior resistance to fire and moisture. Its superior insulating properties make it the ideal choice for demanding environments and can be easily cut and fitted. Aqua fire is resistant to chemical and biological attack, and is highly durable. Its resistance to water makes it ideal for cladding and external rendering.

This fire-resistant board is suitable for external and internal partitions, and is easy to install. It can be built to a 90-minute fire resistance level for external walls, and up to 120-minutes for internal partitions. The board also has a water-repellent surface to repel water.
GlasRoc(r) Shaftliner

GlasRoc(r) Shaftliner is a high-performance sheathing board for interior and exterior applications that provides superior fire and moisture resistance. It is made with an acrylic-coated glass mat, which is resistant to UV rays and is extremely lightweight. It is certified to meet building code requirements.

The fire-resistant board is available in a variety of thicknesses, from 0.5 to 30mm. Its EGRG (Embedded Glass Reinforced Gypsum) version is designed to protect multi-story buildings and multi-family residential buildings. It is engineered with a glass tissue below the surface and glass rovings throughout its core. Moreover, it has an exceptional moisture-tolerance for partly exposed applications.

It has a UL/ULC classification and is suitable for exterior use. Its fire resistance is excellent and it is recommended for a wide range of applications, including in fire-prone areas. The board is available in non-fire-rated and fire-rated versions, and it can be custom-ordered. It can also be painted on site.

Another fire-resistant board for exterior applications is GlasRoc(r) Shaftliner. It complies with ASTM C1396 Section 5 standards. It has a flame spread rating of 15 and smoke developed of zero. It is also UL-certified Type TG-C and is ULC-classified Type C.
Kemwell Fire

Kemwell FireKem FP-900 is a non-combustible fire protection board suitable for internal and external use. It is lightweight and easy to install. It is also anti-bacterial and vermin resistant. This makes it an ideal choice for use in hospitals, kitchens, and other food preparation areas.

Kemwell FP-900 (R) has excellent fire resistance performance and is approved for up to 240 minutes of exposure time. Its dimensional stability and thermal conductivity are excellent, even under damp conditions. It can be used for both exposed and semi-exposed applications, and it can be left uncoated.

Fire resistant boards are made of a special material that resists heat, fire, and radiation. They are ideal for a variety of applications and offer 30 minutes to 240 minutes of fire protection. The materials are durable and can be used for walls, ceilings, bulkheads, and enclosures. They provide a high-quality finish and offer superior fire protection. render carrier board
They are non-combustible, have low thermal conductivity, and are resistant to moisture, insect and vermin.

Kemwell Fire resistant board for external use is highly durable, and can be used in a wide range of applications. In addition to lining external walls, it is ideal for soffits, porches, roof linings, and duct and pipe covers. In addition, it is highly insulating and water-resistant, making it a practical choice for a variety of demanding applications.
DensDeck(r) Roof Boards

DensDeck(r) Roof Board is a durable, fire resistant roofing material manufactured by Georgia-Pacific Gypsum. It is a versatile product used in a variety of roofing systems. It provides dimensional stability and fire resistance for the entire roof assembly. As such, it is widely respected by leading roofing system manufacturers.

The fire resistance of DensDeck Prime Roof Board is determined by its high-density gypsum cores and fiberglass facings. While fire resistance is one of the most important features of this material, it can be adversely affected by free moisture. Consequently, it is necessary to protect the boards by ensuring that they are separated from other roofing components such as roofing membrane.

Fire-resistant roof boards are an excellent choice for buildings with metal or solar roofs. The gypsum core is made from non-combustible materials like calcium sulphate, which slows the spread of flames and protects the building. Furthermore, these boards are lightweight and compatible with most single-ply roofing membrane adhesives.

The DensDeck(r) Roof Board is available in several grades, including the high-density DensDeck(r) Prime and DensDeck(r) Fireguard. All four DensDeck products are fire-resistant for external use.
James Hardie Siding

Among the many benefits of using Hardie siding, one of the most important is its ability to withstand fire. This means that if your house is on fire, you will have more time to evacuate and save your possessions. This is extremely important, as fire can cause substantial damage to your home and valuables. Moreover, fire can take a long time to put out.

Unlike wood, James Hardie siding is not combustible. Therefore, it will not spread fire and will not contribute to the combustion of the interior wallboard. It is also installed with cement nails, which stand up to fire. If your house is located in a high-risk area, you can use James Hardie Siding to protect your home from fire.

In addition to being fire-resistant, James Hardie siding is also beautiful. As a matter of fact, many homeowners choose James Hardie over other siding options. It’s also the most popular brand of siding in the U.S. Because of its durability, James Hardie siding is resistant to pests and weather.

Despite its fire-resistance, James Hardie siding is also available in a variety of colors and styles. The fiber cement material can resist heat for hours, thus keeping your home safe from flames. Unlike wood, it also resists mold and pests. It also requires minimal maintenance and lasts for a long time, which means it is an excellent investment for your home. It is also backed by a 30-year product warranty.